Does MWS need to be dispensed and waterproof when used? Does it affect the performance of 24GHz microwave sensor? / MWS在使用時需要點膠及做防水是否對24GHz 微波sensor性能產生影響 /

Q & A 討論群 SHARP Products Q & A Microwave sensor Does MWS need to be dispensed and waterproof when used? Does it affect the performance of 24GHz microwave sensor? / MWS在使用時需要點膠及做防水是否對24GHz 微波sensor性能產生影響 /

正在檢視 1 篇文章 - 1 至 1 (共計 1 篇)
  • 作者
    文章
  • #420
    AvatarFinalc
    管理員

    Will have an impact.
    When dispensing the IC component (2.5mm angle) connected to the patch antenna,
    The sensitivity will drop slightly, and it is necessary to evaluate whether there is a problem with the detection distance used.

    ※E.g:
    If sensitivity is required for long-distance detection with a human body sensing distance of 5 m or more,
    It is recommended to place the module as a whole into a hollow cavity.

     

     

    會產生影響。
    在連接貼片天線(patch antenna)的IC部件(2.5mm角)處點膠處理的話,
    感度會稍許下降,需要評估使用的檢測距離是否有問題。

    ※例如:
    需要人體感知距離5m以上的長距離檢測等感度用途的話,
    推薦將此模組整體放入一個中空的腔體。

正在檢視 1 篇文章 - 1 至 1 (共計 1 篇)
  • 抱歉,回覆主題必需先登入。